Conductivity

Conductivity meter with USB logger type M3036

The M3036 conductivity meter is suitable for water, waste water or pure water conditioning in continuous or batch-type operating modes, for liquid chromatography or for general chemical process monitoring.

  • Conductivity meter for 0 ... 20/200/2000/20000/200000uS
  • USB data logger
  • Galvanically separated signal output
  • Precision 3-wire PT100 temperature input
  • Up to 5 limit contacts

additional Information
Conductivity transmitter type M2817

The M2817 conductivity transmitter is packed in a polypropylene case. Different conductivity electrodes in stainless steel and graphite are available.

  • direct pipe installation
  • temperature compensation to 80ºC
  • current output, , galvanically isolated
  • qualified for food industry / sterilizable cells

additional Information
Conductivity meter / controller type M2436

The M2436 conductivity meter is mounted in a +/-180º turnable, water resistant, plastic housing. Any MOSTEC conductivity cell can be mounted directly to the pipe and is attached to the instruments bottom.

  • direct pipe installation, +/-180º turnable
  • temperature compensation to 130ºC
  • 2 current outputs: for conductivity and temperature
  • qualified for food industry / sterilizable cells

additional Information
Inductive conductivity meter / controller type M2436si-PP

The M2436si-PP Inductive conductivity meter / controller is mounted in a +/-180° turn-able, water resistant, plastic housing. It measures the ohmic resistance of the liquid, without any electric contact to the measuring system. The system is much less fragile to any kind of contamination. As long as the geometry of the sensor remains intact (measurement hole not clogged), the measurement accuracy is not affected.

  • cell built completely in polypropylene (PP)
  • direct pipe installation, +/-180º turn-able
  • temperature compensation up to 80ºC
  • 2 current outputs: one for conductivity and one for temperature
  • qualified for food industry
  • custom specific seal material available

additional Information
Inductive Conductivity meter type M2436si-PEEK

The M2436si Inductive conductivity meter is mounted in a +/-180° turnable, water resistant, stainless steel case. It measures the ohmic resistance of the liquid, without any electric contact to the measuring system.

  • cell completely in PEEK
  • direct pipe installation, +/-180º turnable
  • temperature compensation to 130ºC
  • 2 current output: for conductivity and temperature
  • qualified for food industry / sterilizable cells

additional Information
Conductivity meter / controller type M3136

The M3136 conductivity meter is suitable for water, waste water or pure water conditioning in continuous or batch-type operating modes, for liquid chromatography or for general chemical process monitoring.

  • 2 alarm contacts
  • for conductive sensors
  • temperature compensation to 120ºC
  • LCD display, 15mm, color adjustable
  • programmable
  • modbus (optional)
  • USB - logger (optional)
  • optical alarm contact

additional Information
Conductivity meter / controller type M3329LW

The M3329LW Conductivity meter / controller is suitable for water, waste water or pure water conditioning in continuous or batch-type operating modes, for liquid chromatography or for general chemical process monitoring.

  • 2 alarm contacts (optional)
  • for conductive sensors
  • temperature compensation to 120ºC
  • LCD display, 15mm, color adjustable
  • programmable
  • modbus (optional)
  • USB - logger (optional)
  • optical alarm contact

additional Information
Conductivity controller / meter type M2136

The M2136 conductivity controller is suitable for water, waste water or pure water conditioning in continuous or batch-type operating modes, for liquid chromatography or for general chemical process monitoring.

  • for conductive sensors
  • temperature compensation to 120ºC
  • rail mounting

additional Information
Conductivity cell sensor type M8836S

The conductivity cell M8836S is used for water, waste water and ultra pure water measurements in batch and continuous applications. They are used e.g. in chromatography, water purification fermentation and general chemical processes.

  • internal Pt-100 temperature sensor
  • cell material: PVDF
  • measurement range: 1µS to 2000µS

additional Information
Conductivity sensor type M8836S-10 (waste water measurements)

The conductivity cell M8836S10 is used for water and waste water measurements in batch and continuous applications.

  • internal Pt-100 temperature sensor
  • cell material: PVDF
  • measurement range: 0.05mS to 200mS

additional Information
Conductivity sensor type M8836S-0.01

The conductivity sensor cell M8836S-01 is used for water, waste water and ultra pure water measurements in batch and continuous applications. They are used e.g. in chromatography, water purification fermentation and general chemical processes. The accuracy is 2% in the temperature range of -30...130ºC.

  • internal Pt-100 temperature sensor
  • cell material: stainless steel
  • measurement range: 0µS to 20µS

additional Information
Conductivity sensor type M9836S-C1

The conductivity cell M9836S, with graphite electrodes, is used for water, waste water and ultra pure water measurements in batch and continuous applications.

  • internal Pt-100 temperature sensor
  • cell material: Polypropylene
  • measurement range: 1µS to 10mS

additional Information
Inductive conductivity sensor type M8836Si

The inductive conductivity cell M8836s measures the ohmic value of a liquid without exposing any metallic parts to that measured liquid. That means, the measuring system has no galvanic connection to the liquid.

  • internal Pt-100 temperature sensor
  • cell material: PVC or PVDF, stainless steel
  • measurement range: 0,1mS to 2000mS
  • qualified for food industry / sterilizable

additional Information