Load cells

Platform Scale type M2428-09

The platform scale is used in content measuring for liquid gas bottles to monitor the remaining gas. The parallel bending beam consists of a strain gage sensor with integrated electronics to convert the weight to a 4...20mA signal.

  • Platform Scale 50, 100, 150, 200kg
  • output 4...20mA, 2-wire techniques

additional Information
Load cell for weight and force measurement type M2428

M2428 is a low-cost load cell (balance, scale, weighing device) to measure weights or forces in the range of 100kg (~1'000N) to 100'000kg (~1'000'000N).

  • for weight- and force measurement 100...100'000kg
  • output 4...20mA, 2-wire techniques

additional Information
Bending beam type M2428-13

The M2428-13 is a low-cost bending beam to measure weights or forces in the range of 100kg (~1'000N) to 20'000kg (~200'000N). The bending beam consists of a strain gage sensor with integrated electronics to convert the force or weight to a 4…20mA signal.

  • for weight- and force measurement 100...20'000kg
  • output 4...20mA, 2-wire techniques

additional Information
Load cell type M2428-14

The M2428-14 is a low-cost load cell to measure weights or forces in the range of 25kg (~250N) to 30'000kg (~300'000N). The bending beam consists of a strain gage sensor with integrated electronics to convert the force or weight to a 4…20mA signal.

  • for weight- and force measurement 25...30'000kg
  • output 4...20mA, 2-wire techniques

additional Information
Weight cushion type M2428-15

The custom made weight cushion type M2428-15 is made in Ni-Cr steel to a capacity of up to 500'000kg.

  • custom made weight cushion, Ni-Cr steel, up to 500'000kg
  • output 4...20mA, 2-wire techniques

additional Information
Measuring Amplifier for Strain Gauge Sensors type M2428-91

The very small measuring amplifier type M2428-91 converts the measuring bridge directly to a 4...20mA 2-wire signal.

  • bridge resistance 350...5000Ω
  • output 4...20mA, 2-wire techniques

additional Information
Load_cell_Mostec_Interface
M2428 Data Interface

With the M2428 data interface it is possible to program load cells, bending beams and platform scales of the M2428 series.

additional Information