Mostec Swiss Electronics Custom Electronics min

Conductivity meter / controller type M2436

  • direct pipe installation
  • two line LCD display
  • temperature compensation to 130ºC
  • measurement range: 0...20µS to 0...20mS
  • 2 current output: for conductivity and temperature
  • 2 limit contacts
  • external range selection
  • power supply 24VAC or DC, galvanically isolated
  • polypropylene plastic case
  • qualified for food industry / sterilizable cells
Operating Instructions
Data Sheet

Product Details: Conductivity meter / controller type M2436

The M2436 conductivity meter is mounted in a +/-180º turnable, water resistant, plastic case. Any MOSTEC conductivity cell can be mounted directly to the pipe and is attached to the instruments bottom. These cells cover a dynamic range from 0.01µS to 20mS.
The conductivity meter is suitable for water, waste water or ultrapure water conditioning in continuous or batch-type operating modes, for liquid chromatography or for general chemical process monitoring.
Temperature coefficient of the cell is compensated either manually or automatically by a Pt-100 platinum probe within the range of 0 to 130ºC.

An 8x2 LCD character display shows the currently measured conductivity and the process temperature.
These values are available at two galvanic isolated outputs of 0...20mA or 4...20mA.

Optionally, all measuring ranges are externally selectable with digital control wires during the measurement process. Two isolated, free limit contacts are also optionally available to control valves or other control elements.

The M2436 can be supplied by either 24VAC or DC.

Supply lines and all other lines, either from or to the conductivity meter, are protected by internal noise limiters against HF-noise. A cable of either 2m or 5m is used to connect the M2436 signals and power supply. The customer can request any other cable length if he wishes.