Display units

Universal digital display type M3329

The digital LCD display M3329 is used to indicate or monitor any sensor signal. It converts the input signal to an internal standard signal of for example 0 to 100.0%. The 4-digit measuring value, as well as the status of the alarm contacts, is shown on an easy to read LCD-Display.

  • 2 alarm contacts (optional)
  • input: voltage & current or temperature, special conversions
  • LCD display, 15mm, color adjustable
  • programmable
  • modbus (optional)
  • USB - logger (optional)
  • optical alarm contact

additional Information
Universal digital display type M3605

The universal digital display M3605 is used to indicate or monitor any sensor signal. It converts the input signal to an internal standard signal of for example 0 to 100.0%. In this range five alarm contacts can be set independently. The 4-digit measuring value, as well as the status of the alarm contacts, is shown on an easy to read LCD-Display.

  • 5 alarm contacts
  • input signals for current & voltage
  • signal output (current or voltage)
  • modbus (optional)
  • USB - logger (optional)
  • optical alarm contact

additional Information
Universal digital display / Alarm unit type M3118

The alarm unit M3118 is used to check or control any type of signal current or voltage. It converts the input signal to an internal standard signal of for example 0 to 100.0%. The 4-digit measuring value, as well as the status of the alarm contacts, is shown on an easy to read LCD-Display.

  • 2 alarm contacts
  • input: voltage & current or temperature, special conversions
  • LCD display, 15mm, color adjustable
  • programmable
  • modbus (optional)
  • USB - logger (optional)
  • optical alarm contact

additional Information
Programmable universal digital display type M2229

The programmable universal digital display M2229 is used to indicate or monitor any sensor signal. It converts the input sensor signal to a programmable display for example 0 to 100.0%. In this range two alarm contacts can be set independently.

  • input: U, I, conductivity, pH, special conversions
  • LED display, 14mm
  • programmable

additional Information
Miniature LED digital display type M2029

The M2029-A and M2029-AR are panel mounted display units to display physical units as: pressure, weight, RPM, temperature, voltage, current, %, ppM etc. Input signals are voltages or currents.

  • small dimensions 48x24x75mm (BxHxT)
  • LED display, 10mm
  • programmable

additional Information
Universal LED display / Alarm unit type M2118

The alarm unit M2118 is used to check or control any type of signal current or voltage signal. It converts the input signal to an internal standard signal of for example 0 to 100.0%. In this range two alarm contacts can be set independently.

  • input: 0/4...20mA, 0...10V, Pt-100, special conversions
  • 2 alarm contacts
  • programmable

additional Information